China Surge Protection suppliers

Reportes y quejas sobre jugadores y miembros del staff.
zinanwang1
Mensajes: 10

China Surge Protection suppliers

Mensaje por zinanwang1 » Mar, 03 Dic 2019, 05:37

Model No.F1V5400 (CS/)1-F2V7450 (CS/)1-F3V2400 (CS/)1-F3V8450 (CS/)1-F4V4400 (CS/)1-
Test class IEC/EN/VDEClass II/C/ T2
Type of NetworkTT , TN , IT
Protection ModeL / N - PE
Nominal voltage 50(60)Hz UN110V~220V~220V~220V~220V~
Rated Voltage (Max. Cont. Operating Voltage) UC150V~275V~320V~385V~440V~
Max. discharge current (8/20μs)Im ax80kA
Nominal discharge current (8/20μs) In40kA
Voltage protective level Up≤1.0kV≤1.7kV≤2.0kV≤2.5kV≤2.7kV
Response time tA≤25ns
Recommended back-up fuse125A
Isolation resistance>102 MΩ
I/O ConnectionsMulti core wire:6mm2 ~35mm2
Mounting35mm Symmetrical rai (l EN50022/DIN46277-3)
Operation temperature range / humidity / altitude-40℃~+80℃ / 30%~90% / 3000m
Degree of protectionIP20
Housing materialUL94 V-0
Disconnection indicatorMechanical indicator (Green: OK, Red: replace)
Remote control contactOptional
Port definition of remote control contactRange of signal accessRecommended wire specification
ACUmax≤250V
Imax≤0.5ASingle core wireMax≤1.5mm2
DCUmax≤60V
Imax≤0.1AMulti core wireMax≤1.3mm2
Remark:if the model number is without "S",the model is without remote control contact functionChina Surge Protection suppliers
website:http://www.surge-arrester-china.com/ac- ... rotection/

Responder